Floor-Gard HD High Traffic and Floor-Gard HD Grind & Seal are high-performance floor coating systems with aluminum oxide for added protection against abrasion and impact from carts, equipment, and vehicles.
Floor-Gard HD
High performance, water-based urethane floor systems
System Overview
Innovacoatings Floor-Gard HD systems offer exceptional abrasion and chemical resistance, making them ideal for environments where maintaining a durable and sanitary environment is essential. Its low VOC is well below South Coast AQMD standards, and produces little odor. With a durability four times greater than standard interior topcoats, facilities can achieve a 75% reduction in lifecycle cost by extending repaint cycles and reducing the facilities out-of-service time.
Floor-Gard HD urethanes are available in gloss, semi-gloss, and satin finishes. Also, they are used in our Wall-Gard HD interior wall coating system, allowing applicators to use the same materials on walls and floors, creating a seamless barrier from floor to ceiling.
Use Area:
Hospitals, Education, Food/Beverage, Pharmaceutical, Institutional, Aviation
Type:
Waterborne Urethane
Features:
- High durability
- Anti-microbial
- Cleanable
- High chemical resistance
- Extreme abrasion resistance
Benefits:
- Reduction in lifecyle costs
- Does not harbor mold or fungal growth
- Scrub resistant finish
Selected Physical Properties
| Product | Description | Test Method | Results |
|---|---|---|---|
| 70900/70910, gloss finish | Taber Abrasion | ASTM D4060 | 15 mg (1,000 CS-17) |
| 70900/70910, gloss finish | Pencil Hardness | ASTM D3363 | 4H Gouge |
| 70901/70910, semi-gloss finish | Taber Abrasion | ASTM D4060 | 67 mg (1,000 CS-17) |
| 70901/70910, semi-gloss finish | Pencil Hardness | ASTM D3363 | 4H Gouge |
| 70902/70910, satin finish | Taber Abrasion | ASTM D4060 | 20 mg (1,000 CS-17) |
| 70902/70910, satin finish | Pencil Hardness | ASTM D3363 | 4H Gouge |
Floor-Gard HD System Builds
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 3 - Topcoat | Floor-Gard HD urethane + #220 aluminum oxide* |
350-400 sf/gal | NA |
| 2 - Base | 70714/70715 | 200 sf/gal | 8/8 |
| 1 - Primer | 70714/70715 | 200 sf/gal | 8/8 |
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 2 - Topcoat | Floor-Gard HD urethane + #220 aluminum oxide |
400-450 sf/gal | NA |
| 1 - Base | Floor-Gard HD urethane | 200-267 sf/gal | 8-6/6-3 |
Technical Documents
What areas of my facility are appropriate for this system?
Any areas where extreme abrasion resistance is needed including production, warehouse, hallways, common areas, bathrooms.
How will this system reduce life cycle costs?
System topcoat has abrasion resistance twice that of any generic/typical topcoat utilizing aluminum oxide to protect integrity of system throughout its life.
How can this system be used for recoating existing floor systems?
May be applied over sound, high performance coating systems by sanding/abrading/patching and installation of intermediate and topcoats.
How long will the system last with daily cleaning?
5 years plus with normal abuse and wear. System is sustainable by sand/reapplication of topcoats.
What are the general recommendations for applying this system?
Surface prep of CSP3, squeegee/backroll, apply within system guidelines for each step.
You can trust Floor-Gard HD in your next project
High-performance protection tested under the harshest environments. Floor-Gard HD was developed tooffer exceptional abrasion and chemical resistance, making them ideal for environments where maintaining a durable and sanitary environment is essential.
