Peda-Gard FC provides outstanding adhesion, crack bridging, and abrasion resistance. It is ideal for interiors and other odor-sensitive applications where fast turnaround is required.
Peda-Gard FC
Two component, fast cure, low odor urethane system with an aliphatic topcoat for fast turnaround and/or odor sensitive applications
System Overview
Peda-Gard FC’s low odor and fast curing allows for pedestrian traffic 24-36 hours after installation. Available in several standard colors, it is ideal for walkways, plaza decks, and stadiums. Allows quick installation of the full coating system, and is compatible with the most stringent VOC regulations. This system is suited for work in or near occupied buildings where odor may be an issue.
Peda-Gard FC provides a seamless, durable, skid-resistant membrane, preventing ingress of moisture and chloride intrusion that lead to premature deterioration.
Maintain the structural integrity and appearance of your investments with Peda-Gard FC, and prolong the lifecycle of your structure while reducing cost over time with proper maintenance.
Use Area:
Pedestrian
Type:
Urethane
Features:
- High elongation base coat
- Tough, durable top coat
- Wear course with lock coat
Benefits:
- Provides excellent crack bridging properties
- Provides excellent abrasion resistance and durability
- Industry recognized to provide the best in performance and durability
Selected Physical Properties
| Product | Description | Test Method | Results |
|---|---|---|---|
| FC7510/FC7961 topcoat | Dynamic Coefficient of Friction | ANSI A137.1 | 0.71, dry surface |
| FC7510/FC7961 topcoat | Dynamic Coefficient of Friction | ANSI A137.1 | 0.50, wet surface |
| FC7540/FC7964 topcoat | Dynamic Coefficient of Friction | ANSI A137.1 | 0.73, dry surface |
| FC7540/FC7964 topcoat | Dynamic Coefficient of Friction | ANSI A137.1 | 0.63, wet surface |
| FC7510/FC7561 topcoat | Taber Abrasion | ASTM D4060 | 55 mg/1,000 CS-17 |
| FC7540/FC7964 topcoat | Taber Abrasion | ASTM D4060 | 95 mg/1,000 CS-17 |
| Peda-Gard FC system | Standard Specifications | ASTM C957 | Exceeds Requirements |
Peda-Gard FC System Build
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 4 - Topcoat | FC7510/FC7961 FC7540/FC7964 (UV) |
175 sf/gal 160 sf/gal |
9/9 10/9 |
| 3 - Wear | FC7510/FC7961 + 7992 aggregate |
200 sf/gal 15 lbs/100 sf |
8/8 |
| 2 - Base | FC7500/FC7960 | 88 sf/gal | 18/18 |
| 1 - Primer | 7780/7781 7797/7798 |
300 sf/gal 300-500 sf/gal |
NA |
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 3 - Wear | FC7510/FC7961 + FC7540/FC7964 (UV) 7992 aggregate |
106 sf/gal 95 sf/gal 10 lbs/100 sf |
15/15 16/15 |
| 2 - Base | FC7500/FC7960 | 80 sf/gal | 20/20 |
| 1 - Primer | 7780/7781 7797/7798 |
300 sf/gal 300-500 sf/gal |
NA |
Technical Documents
How long does Peda-Gard FC need to cure before opening to pedestrian traffic?
Typically the coating needs to cure 24 hours before opening to pedestrian traffic. In cooler temperatures this time may be 36 hours.
What type concrete curing compounds can be used with Peda-Gard FC?
It is best to water cure concrete or use a sodium silicate curing compound. The use of acrylic or other “film forming” compounds will create bond issues and must be removed.
What is the minimum temperature at which Peda-Gard FC can be applied?
The coating should be applied at temperatures that are 40°F/4°C and rising during application.
What is the maximum concrete temperature that Peda-Gard FC can be applied?
The coating should not be applied to deck surfaces that are =/> 100°F/38°C.
You can trust Peda-Gard FC in your next project
High-performance protection tested under the harshest environments. Peda-Gard FC was developed to endure intense pedestrian traffic while providing a seamless, durable protection against cracks and abrasion.
