Elastacryl FR is a seamless, fully adhered fluid-applied coating system for use over SPF roofing substrates.
Elastacryl FR
Acrylic system for use over spray polyurethane foam roofs.
System Overview
Elastacryl FR uses Neogard 7251 and 7261 acrylic coatings; they are single component, water based, and elastomeric. Both 7251 and 7261 meet LEED performance requirements for low-slope roofing, and are approved by the Cool Roof Ratings Council (CRRC). They also meet VOC requirements for the South Coast AQMD. Recommended SPF density is 2.7–3.2 pounds.
Use Area:
Roofing
Type:
Acrylic
Features:
- Low odor
- Lightweight
- Energy efficient
- Seamless and fully adhered
- Elastomeric
Benefits:
- Environmentally friendly
- Installed over existing roof with minimal tear-off
- Reflects light and emits heat
- One-piece customized finished roof
- Accomodates thermal expansion and contraction
Selected Physical Properties
| Product | Description | Test Method | Results |
|---|---|---|---|
| 7251 and 7261 | Tensile Strength | ASTM D2370 | 280 psi |
| 7251 and 7261 | Elongation | ASTM D2370 | 270% |
| 7251 and 7261 | Water Resistance | ASTM D471 | < 20% |
| 7251 and 7261 | Solar Reflectance | ASTM C1549 | 0.83 |
| 7251 and 7261 | Thermal Emittance | ASTM C1371 | 0.87 |
Elastacryl FR System Build
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 4 - Optional Granule Coat |
7251 or 7261 + #11 roofing granules |
66 sf/gal 30 lbs/100 sf |
24/12 |
| 3 - Third | 7251 or 7261 | 66 sf/gal | 24/12 |
| 2 - Second | 7251 or 7261 | 66 sf/gal | 24/12 |
| 1 - First | 7251 or 7261 | 66 sf/gal | 24/12 |
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 4 - Optional Granule Coat |
7251 or 7261 + #11 roofing granules |
66 sf/gal 30 lbs/100 sf |
24/12 |
| 3 - Third | 7251 or 7261 | 50 sf/gal | 32/16 |
| 2 - Second | 7251 or 7261 | 50 sf/gal | 32/16 |
| 1 - First | 7251 or 7261 | 50 sf/gal | 32/16 |
Technical Documents
Can Innovacoatings acrylic roof coatings withstand ponding water?
No. Innovacoatings roofing acrylics are water-based, so they cannot withstand ponding water.
Is a moisture analysis required prior to the installation of Elastacryl FR?
A moisture analysis is not required, but is highly recommended prior to the start of work.
What warranties are available for Elastacryl FR?
We offer Material Only and Labor/Material Warranties for 10 and 15 year terms.
Do you have to be an approved applicator to install Neogard warranted systems?
You do not have to be an approved applicator to purchase material and receive a Material Warranty. You must be a Certified Applicator to receive a Labor/Material Warranty.
You can trust Elastacryl FR in your next project
High-performance protection tested under the harshest environments. Elastacryl FR is a seamless, fully adhered fluid-applied coating system for use over SPF roofing substrates.
