Silicone SP is an RTV silicone coating system for use over single-ply roofing substrates including TPO, PVC, EPDM, and others. Can be warranted for up to 20 years.
Silicone SP
Silicone system for use over single-ply roofing substrates
System Overview
The durable Silicone SP system is comprised of our 7860-LO series low-odor silicone roof coating. 7860-LO series is a single-component, low-odor, room-temperature vulcanizing, weather-protective coating; it is Energy Star and Cool Roof Ratings Council (CRRC) approved, and meets LEED requirements (see the 7860-LO Product Data Sheet for LEED details).
Silicone SP forms a seamless, monolithic weatherproofing membrane for superior waterproofing, durability, flexibility, color retention and potential energy savings. Silicone technology allows the system to perform under ponding water conditions. It is intended for long-term protection for institutional, commercial, industrial, and high-rise/multi-family residential applications.
Features:
- Sustainable
- Seamless/fully adhered
- Lightweight
- Energy efficient
- Low odor
Benefits:
- Reduce life cycle cost
- No seams to fail
- Installed over existing roof with minimal tear-off
- Reflects light and emits heat
- Environmentally friendly
Selected Physical Properties
| Product | Description | Test Method | Results |
|---|---|---|---|
| 7860-LO series | Tensile Strength | ASTM D412 | 270 psi |
| 7860-LO series | Elongation | ASTM D2370 | 350% |
| 7860-LO series | Water Resistance | ASTM D471 | < 1% |
| 7860-LO series | MVT at 30 mils | ASTM E96 | 2.9 metric perms |
Silicone SP System Build
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 3 - Second | 7860-LO series | 80 sf/gal | 20/12.5 |
| 2 - First | 7860-LO series | 80 sf/gal | 20/12.5 |
| 1 - Primer | 7710 | 300-400 sf/gal | NA |
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 3 - Second | 7860-LO series | 66 sf/gal | 24/15 |
| 2 - First | 7860-LO series | 66 sf/gal | 24/15 |
| 1 - Primer | 7710 | 300-400 sf/gal | NA |
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 3 - Second | 7860-LO | 57 sf/gal | 28/17.5 |
| 2 - First | 7860-LO | 57 sf/gal | 28/17.5 |
| 1 - Primer | 7710 | 300-400 sf/gal | NA |
Technical Documents
Is a moisture analysis required prior to the installation of the Silicone SP coating?
A moisture analysis is not required but highly recommended prior to the start of work.
Are seam details a requirement for the Silicone SP system?
Seam details are not required. However, seams do need to be inspected, and any defective seams should be detailed with 70695 silicone mastic.
What warranties are available for Silicone SP?
We offer Material Only and Labor/Material Warranties for 10, 15, and 20 year terms.
Do you have to be an approved applicator to install Neogard warranted systems?
You do not have to be an approved applicator to purchase material and receive a Material Warranty. You must be a Certified Applicator to receive a Labor/Material Warranty.
You can trust Silicone SP in your next project
High-performance protection tested under the harshest environments. Silicone SP was developed to form a seamless, monolithic weatherproofing membrane for superior waterproofing, durability, flexibility, color retention and potential energy savings.
