Skip to main content

Elasta-Gard C Aliphatic

Aliphatic urethane topcoat roofing system

Elasta-Gard C Aliphatic is a urethane coating system for use over for use over concrete roofing substrates.

System Overview

Elasta-Gard C Aliphatic incorporates a 70620-CA aromatic urethane base coat with a 7490-CA aliphatic urethane top coat. It is intended for long-term protection over concrete roof substrates. It is ideal for institutional, commercial, industrial, and high-rise/multi-family residential applications.

Innovacoatings -CA urethane roof coatings form a seamless membrane for superior durability, flexibility, color retention and long-term protection. They comply with South Coast AQMD VOC regulations. They are typically rolled, but can also be sprayed (contact Innovacoatings for information on spray equipment). Our 7490-CA aliphatic topcoat has high UV resistance, and is less likely to chalk than an aromatic coating. It and our 70620-CA base coat also have high tensile strength and chemical resistance, which prevents failure due to expansion and contraction of the system, and failures around critical areas like penetrations and flashing.

Use Area:

Roofing

Type:

Aliphatic Urethane

Features:

  • Single component urethane
  • Aliphatic urethane topcoat
  • High elongation and tensile strength
  • Energy efficient
  • Sustainable

Benefits:

  • Easier installation
  • Great UV Stability
  • Greater impact resistance to hail and foot traffic
  • Lower energy expenses
  • Reduces life cycle costs

Selected Physical Properties

Product Description Test Method Results
70620-CA Tensile Strength ASTM D412 1,000 psi
70620-CA Elongation ASTM D412 375%
70620-CA Water Resistance ASTM D471 < 2%, 7 days
7490-CA Tensile Strength ASTM D412 2,300 psi
7490-CA Elongation ASTM D412 230%
7490-CA Water Resistance ASTM D471 < 2%, 7 days

Elasta-Gard System Build

Before application, always check Neogard Product Data Sheets and Guide Specifications for mixing instructions and other important information.

Coat Product Coverage Rate Mils WFT/DFT
4 - Optional Granule 7490-CA +
#11 roofing granules
100 sf/gal
30 lbs/100 sf
16/12
3 - Topcoat 7490-CA 66 sf/gal 24/18
2 - Base 70620-CA 66 sf/gal 24/18
1 - Primer 7797/7798 300 sf/gal NA
Coat Product Coverage Rate Mils WFT/DFT
5 - Optional Granule 7490-CA +
#11 roofing granules
100 sf/gal
30 lbs/100 sf
16/12
4 - Topcoat 7490-CA 100 sf/gal 16/12
3 - Intermediate 7490-CA 100 sf/gal  16/12
2 - Base 70620-CA 66 sf/gal 24/18
1 - Primer 7797/7798 300 sf/gal NA

Technical Documents

Is a moisture analysis required prior to the installation of Elasta-Gard C Aliphatic?

A moisture analysis is not required, but is highly recommended prior to the start of work. Neogard recommends a mat test for concrete surfaces.

What detail work is needed with the Elasta-Gard C Aliphatic system?

All pipe penetrations, cracks and cold joints, control joints and roof-mounted equipment should be detailed. Refer to the Neogard Fluid-Applied Roofing Coating Systems Application Manua for detailed guidelines.

Are Neogard urethane roofing products single component or plural?

All Innovacoatings roofing urethanes are single component products. Some of the recommended primers may be two component.

What warranties are available for Elasta-Gard C Aliphatic?

We offer Material Only and Labor/Material Warranties for 10 and 15 year terms.

Do you have to be an approved applicator to install Innovacoatings warranted systems?

You do not have to be an approved applicator to purchase material and receive a Material Warranty. You must be a Certified Applicator to receive a Labor/Material Warranty.

You can trust Elasta-Gard C Aliphatic in your next project

High-performance protection tested under the harshest environments. Elasta-Gard C Aliphatic was developed to provide high-performance roof coating systems form a seamless membrane for superior durability, flexibility, color retention and long-term protection.

Contact Us