Aliphatic urethane topcoat system with asphaltic emulsion coat for use over built-up roofs and modified bitumen.
Elasta-Gard Emulsion
System Overview
Elasta-Gard Elasta-Gard Emulsion is a urethane coating system with an asphaltic emulsion coat for use over BUR/MB or granulated cap sheet. The system incorporates an asphaltic emulsion reinforced with fabric or chopped strand fiberglass, a 70620-CA aromatic urethane base coat, and a 7490-CA aliphatic urethane top coat. Contact Innovacoatings for approved asphaltic emulsion manufacturers; refer to the system Guide Specification for required physical properties.
Innovacoatings -CA urethane roof coatings form a seamless membrane for superior durability, flexibility, color retention and long-term protection. They comply with South Coast AQMD VOC regulations. They are typically rolled, but can also be sprayed (contact Innovacoatings for information on spray equipment). Our 7490-CA aliphatic topcoat has high UV resistance, and is less likely to chalk than an aromatic coating. It and our 70620-CA base coat also have high tensile strength and chemical resistance, which prevents failure due to expansion and contraction of the system, and failures around critical areas like penetrations and flashing.
Use Area:
Roofing
Type:
Aliphatic Urethane
Features:
- Single component urethane
- Aliphatic urethane topcoat
- High elongation and tensile strength
- Energy efficient
- Sustainable
Benefits:
- Easier installation
- Great UV Stability
- Greater impact resistance to hail and foot traffic
- Lower energy expenses
- Reduces life cycle costs
Elasta-Gard Emulsion System Build
Coat | Product | Coverage Rate | Mils WFT/DFT |
---|---|---|---|
6 - 2nd Topcoat | 7490-CA | 66 sf/gal | 24/18 |
5 - 1st Topcoat | 7490-CA | 66 sf/gal | 24/18 |
4 - 2nd Base | 70620-CA | 66 sf/gal | 24/18 |
3 - 1st Base | 70620-CA | 66 sf/gal | 24/18 |
2 - Emulsion | Asphaltic Emulsion + Tietex or Fiberglass* |
9 gal/100 sf |
NA |
1 - Primer | 7780/7781 | 300 sf/gal | NA |