Elasta-Gard BUR/MB Aliphatic is a urethane coating system for use over for use over smooth surfaced built-up roofs, modified bitumen, or granulated cap sheet.
Elasta-Gard BUR/MB Aliphatic
Aliphatic urethane topcoat roofing system
System Overview
Elasta-Gard BUR/MB Aliphatic incorporates a 70620-CA aromatic urethane base coat with a 7490-CA aliphatic urethane top coat. It is intended for long-term protection over smooth and granulated cap sheet, modified bitumen and smooth built-up roof substrates. It is not intended for use directly over gravel-surfaced built-up roof substrates or aluminum coated built-up roof surfaces. It is ideal for institutional, commercial, industrial, and high-rise/multi-family residential applications.
Innovacoatings -CA urethane roof coatings form a seamless membrane for superior durability, flexibility, color retention and long-term protection. They comply with South Coast AQMD VOC regulations. They are typically rolled, but can also be sprayed (contact Neogard for information on spray equipment). Our 7490-CA aliphatic topcoat has high UV resistance, and is less likely to chalk than an aromatic coating. It and our 70620-CA base coat also have high tensile strength and chemical resistance, which prevents failure due to expansion and contraction of the system, and failures around critical areas like penetrations and flashing.
Use Area:
Roofing
Type:
Aliphatic Urethane
Features:
- Single component urethane
- Aliphatic urethane topcoat
- High elongation and tensile strength
- Energy efficient
- Sustainable
Benefits:
- Easier installation
- Great UV Stability
- Greater impact resistance to hail and foot traffic
- Lower energy expenses
- Reduces life cycle costs
Propiedades físicas
Product | Description | Test Method | Results |
---|---|---|---|
70620-CA | Tensile Strength | ASTM D412 | 1,000 psi |
70620-CA | Elongation | ASTM D412 | 375% |
70620-CA | Water Resistance | ASTM D471 | < 2%, 7 days |
7490-CA | Tensile Strength | ASTM D412 | 2,300 psi |
7490-CA | Elongation | ASTM D412 | 230% |
7490-CA | Water Resistance | ASTM D471 | < 2%, 7 days |
Elasta-Gard BUR/MB Aliphatic | Fire Resistance | ANSI/UL 790 | Compliant |
Elasta-Gard BUR/MB Aliphatic System Build
Coat | Product | Coverage Rate | Mils WFT/DFT |
---|---|---|---|
6 - Optional Granule Coat | 7490-CA + #11 roofing granules |
100 sf/gal 30 lbs/100 sf |
16/12 |
5 - Topcoat | 7490-CA | 100 sf/gal | 16/12 |
4 - Intermediate | 7490-CA | 100 sf/gal | 16/12 |
3 - 2nd Base | 70620-CA | 100 sf/gal | 16/12 |
2 - 1st Base | 70620-CA | 100 sf/gal | 16/12 |
1 - Primer | 7780/7781 | 300 sf/gal | NA |
Technical Documents
Is a moisture analysis required prior to the installation of Elasta-Gard BUR/MB Aliphatic?
A moisture analysis is not required, but is highly recommended prior to the start of work.
Are seam details required for the Elasta-Gard BUR/MB Aliphatic system?
Yes. All seams should be detailed with 70690 urethane mastic.
Are Innnovacoatings urethane roofing products single component or plural?
All Innovacoatings roofing urethanes are single component products. Some of the recommended primers may be two component.
What warranties are available for Elasta-Gard BUR/MB Aliphatic?
We offer Material Only and Labor/Material Warranties for 10 and 15 year terms.
Do you have to be an approved applicator to install Neogard warranted systems?
You do not have to be an approved applicator to purchase material and receive a Material Warranty. You must be a Certified Applicator to receive a Labor/Material Warranty.
You can trust Elasta-Gard BUR/MB Aliphatic in your next project
High-performance protection tested under the harshest environments. Elasta-Gard BUR/MB Aliphatic was developed for long-term protection over smooth and granulated cap sheet, modified bitumen and smooth built-up roof substrates.