RTS Decorative Flake System is a rapid-curing, traffic-bearing waterproofing system that offers the utmost in durability to withstand heavy pedestrian traffic on balconies, recreational areas, and other high-traffic surfaces, and provides a beautiful appearance.
RTS Decorative Flake System
Heavy-duty, decorative PMMA/PUMA system for pedestrian traffic surfaces
System Overview
The Neogard RTS Decorative Flake System uses PMMA/PUMA technology to provide a system which can handle the toughest environments, can return to service as soon as one hour after installation, and can be installed in temperatures down to 20°F/-7°C. The high elongation properties of the PMMA/PUMA materials do not require reinforcement typical of other similar systems.
Two versions of the system are specified: System A is a waterproofing system, and System B is ideal for applications not over occupied space. Regardless of the conditions, our RTS Decorative Flake System will provide the protection and attractive appearance your decks need.
Use Area:
Pedestrian Traffic
Type:
PMMA/PUMA
Features:
- Excellent elongation
- Rapid cure
- High abrasion resistance
- Clear topcoat
Benefits:
- Provides crack bridging/waterproofing without need for reinforcement
- Can be opened to service one hour after installation
- High durability
- Non-yellowing for an attractive finish
Selected Physical Properties
| Product | Description | Test Method | Results |
|---|---|---|---|
| 200 RTS Membrane | Elongation | ASTM D638 | 282% |
| 200 RTS Membrane | Low-Temperature Crack Bridging | ASTM C1305 | Pass at 40/60/80 mils |
| 300 RTS Flexible Body Coat | Elongation | ASTM D638 | 204% |
| 300 RTS Flexible Body Coat | Low-Temperature Crack Bridging | ASTM C1305 | Pass at 40/60/80 mils |
| 400 RTS Topcoat | Shore A/D | ASTM D2240 | 95/60 |
| 400 RTS Topcoat | Taber Abrasion | ASTM D4060 | 33 mg/1,000 CS-17 |
RTS Decorative Flake System
| Coat | Product | Coverage Rate | Mils DFT |
|---|---|---|---|
| 4 - Topcoat | 400 RTS | 64-80 sf/gal | 25-20 |
| 3 - Flexible Body | 300 RTS + 900 RTS + UV-stable flakes |
80 sf/gal 10 lbs/gal of 300 RTS 25 lbs/100 sf |
20 |
| 2 - Membrane | 200 RTS | 26 sf/gal | 60 |
| 1 - Primer | 100 RTS | 90 sf/gal | 17 |
| Coat | Product | Coverage Rate | Mils DFT |
|---|---|---|---|
| 3 - Topcoat | 400 RTS | 64 sf/gal | 25 |
| 2 - Flexible Body | 300 RTS + 900 RTS filler + UV-stable flakes |
26 sf/gal 10 lb/gal of 300 RTS 25 lbs/100 sf |
60 |
| 1 - Primer | 100 RTS | 90 sf/gal | 17 |
Technical Documents
How long do RTS systems need to cure before opening to traffic?
The system can be opened to traffic one hour after top coat has been applied, even in cold temperatures.
What type concrete curing compounds can be used with RTS systems?
Water cure concrete or use a sodium silicate curing compound. Acrylic or other film forming compounds will create issues with bonding and must be removed.
What is the minimum temperature at which RTS systems can be applied?
RTS materials can be applied in temperatures as low as 20°F/-7°C. With special instructions it can be applied in colder temperatures.
Can RTS systems be applied during hot temperatures?
RTS materials can be applied hot weather; however, avoid applying in direct sunlight.
You can trust RTS Decorative Flake System in your next project
High-performance protection tested under the harshest environments. RTS Decorative Flake System is a rapid-curing PMMA/PUMA based system that provides waterproofing protection and the utmost in durability to withstand the harshest service.
