Peda-Gard Aliphatic T is a urethane system with an integrally textured top coat. It provides a consistent, well-textured finish with good anti-slip characteristics. The integrally textured top coat eliminates the need for silica aggregates, reducing health risks from silicosis. This system is ideal for high production applications.
Peda-Gard Aliphatic T
Single component, solvent-based urethane system with an integrally textured aliphatic topcoat
System Overview
Neogard T-Systems eliminate the aggregate broadcast step required for standard vehicular and pedestrian traffic coatings.
T-Systems are integrally textured—they have a synthetic aggregate suspended in the coating. Applicators can install these coatings without broadcasting silica quartz aggregate, eliminating a production step and allowing a higher rate of production over standard coatings.
Eliminating the broadcast step also removes the use of hazardous silica sand on job sites, while achieving a more consistent textured surface and improving slip resistance compared to a system with manual aggregate broadcast.
Saving time is key for applications like renovations and routine maintenance, which are typically completed during a facility’s down time.
Use Area:
Pedestrian
Type:
Urethane
Features:
- Excellent elongation
- Integrally textured top coat
- No presence of silica
- Single component
Benefits:
- Provides crack bridging/waterproofing
- No need to broadcast aggregate
- Provides consistent, textured finish
- Reduced health hazard
- Reduced mixing of materials
Selected Physical Properties
| Product | Description | Test Method | Results |
|---|---|---|---|
| 7478 topcoat | Taber Abrasion | ASTM D4060 | 10 mg/1,000 CS-17 |
| 7478 topcoat | MVT at 20 mils | ASTM E96 | 2.5 English perms |
| 7478 topcoat | Shore A | ASTM D2240 | 88-92 |
Peda-Gard Aliphatic T System Build
| Coat | Product | Coverage Rate | Mils WFT/DFT |
|---|---|---|---|
| 3 - Topcoat | 7478 series | 75 sf/gal | 16/12 |
| 2 - Base | 70410 or 7430 series |
60 sf/gal | 26/20 |
| 1 - Primer | 7760/7761 7780/7781 7797/7798 |
300 sf/gal 300 sf/gal 300-500 sf/gal |
NA |
Technical Documents
How long does Peda-Gard Aliphatic T need to cure before opening to pedestrian traffic?
Typically the coating needs to cure 48 hours before opening to pedestrian traffic. In cooler temperatures this time may be 72 hours.
What type concrete curing compounds can be used with Peda-Gard Aliphatic T?
It is best to water cure concrete or use a sodium silicate curing compound. The use of acrylic or other “film forming” compounds will create bond issues and must be removed.
What is the minimum temperature at which Peda-Gard Aliphatic T can be applied?
The coating should be applied at temperatures that are 40°F/4°C and rising during application.
What is the maximum concrete temperature that Peda-Gard Aliphatic T can be applied?
The coating should not be applied to deck surfaces that are =/> 100°F/38°C.
You can trust Peda-Gard Aliphatic T in your next project
High-performance protection tested under the harshest environments. Peda-Gard Aliphatic T was developed to endure intense pedestrian traffic while providing a seamless, durable protection against cracks and abrasion.
